A category for items falling into the General Lab

Showing 1–20 of 22 results

  • Call for Price
    UPS30001

    1 KVA / 900 W Online UPS System (Compact tower format)

    Fully featured online double conversion UPS in compact tower format. Unit contains 3x12V 9Ah internal batteries but runtime can be extended with the addition of matching battery cabinets. High Frequency design provides the highest degrees of power protection and performance. Suitable for a wide range of applications.

    • Power output: 1 KVA / 900 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS60001

    1 KVA Isolated UPS System

    Fully featured online double conversion UPS Systems with built-in isolation transformers offering the best available power protection technology.

    • Power output: 1 KVA
    • Capacity can be extended or reliability improved by connecting the 6 or 10KVA units in parallel
    • Overload minimised with high output power factor of 0.9 or 1.0
    • Comprehensive LCD display, allows full control over unit parameters and at-aglance indication of unit status
    • True online double conversion topology ensures high quality power waveform, adjustable output voltage and frequency conversion mode

    SPECIFICATION

    • Input Voltage Range: 180~300VAC (Full Load) 130VAC~300VAC (<60% Load)
    • Input Frequency Range: 46~54Hz (50Hz System) 56~64Hz (60Hz System)
    • Input Phase: Single Phase w Ground
    • Input Power Factor:: ≥0.98 @ 100% Load
    • Output Voltage: 208/220/230/240VAC
    • Output AC Voltage Regulation: ±1% (Battery)
    • Output Frequency (Synchronised): As input
    • Output : 50±0.1Hz or 60±0.1Hz
    • Waveform: Pure Sinewave
    • Efficiency AC Mode: ≥75%
    • Efficiency ECO Mode: ≥80%
    • Efficiency Battery Mode: ≥87%
    • Battery Type: 12V/7Ah
    • Number of Batteries: 3
    • Charge Current: 1-4A
  • Call for Price
    UPS10001

    1 KVA Sine Wave UPS System

    The VIS-B range utilises digital Line Interactive, (VI) technology with a digitized PWM-based controller providing a pure sinewave (S) output, (VI+S = VIS) making it perfect for sensitive applications where pure power is required.

    As offline & square wave UPS don't provide the level of protection you may require – or are incompatible with your load- and online is too noisy, expensive or inefficient, the VIS series is an ideal product.

    The VIS-B includes an AVR (Automatic Voltage Regulator) as standard, making the UPS enormously effective even in poor mains supply conditions. The wide input voltage window regulates the output voltage to within safe limits without switching to battery power, even if the input voltage fluctuates by as much as 30% from normal. This feature extends battery life and ensures the batteries are in optimal condition, fully charged and ready to offer maximum runtime should the mains power fail.

    The VIS-B features RJ45 surge protection for connection of an Ethernet cable to prevent surges on network lines entering the system through backdoor routes, and UK outlets to connect all equipment without the use of adapters required for IEC output devices. An LCD screen is incorporated displaying connected load and battery charge levels, input and output voltages and warnings for overload and fault conditions.

    The provided software (or free download) enables intelligent shut-down and monitoring of the UPS via USB or RS232 interface. The software enables UPS start-up and shut-down programming, logging and email messaging (alerting users to the UPS status across the local network). The software is compatible with most operating systems, providing a safe shut down in the event of an extended power failure. Additionally, the UPS automatically restarts upon power being restored.

    • Power output: 1 KVA
    • Built-in super smart charger, shortens 50% of charging time
    • Excellent microprocessor control guarantees high reliability
    • Boost and buck AVR for voltage stabilization
    • Auto restart while AC is recovering
    • Pure sine wave output
    • Off-mode charging
    • Cold start function
    • USB communication port and RJ-45 Protection
    • LCD Display
    • UK socket outlets

    Includes:

    • Software CD & USB Lead
    • User Manuals

    Battery Replacement

    This model uses two Yuasa NPW36-12 blocks.

  • Call for Price
    UPS10002

    1 KVA Sine Wave UPS System – IEC Outlets

    The VIS-B range utilises digital Line Interactive, (VI) technology with a digitized PWM-based controller providing a pure sinewave (S) output, (VI+S = VIS) making it perfect for sensitive applications where pure power is required.

    As offline & square wave UPS don't provide the level of protection you may require – or are incompatible with your load- and online is too noisy, expensive or inefficient, the VIS series is an ideal product.

    The VIS-B includes an AVR (Automatic Voltage Regulator) as standard, making the UPS enormously effective even in poor mains supply conditions. The wide input voltage window regulates the output voltage to within safe limits without switching to battery power, even if the input voltage fluctuates by as much as 30% from normal. This feature extends battery life and ensures the batteries are in optimal condition, fully charged and ready to offer maximum runtime should the mains power fail.

    The VIS-B features RJ45 surge protection for connection of an Ethernet cable to prevent surges on network lines entering the system through backdoor routes, and UK outlets to connect all equipment without the use of adapters required for IEC output devices. An LCD screen is incorporated displaying connected load and battery charge levels, input and output voltages and warnings for overload and fault conditions.

    The provided software (or free download) enables intelligent shut-down and monitoring of the UPS via USB or RS232 interface. The software enables UPS start-up and shut-down programming, logging and email messaging (alerting users to the UPS status across the local network). The software is compatible with most operating systems, providing a safe shut down in the event of an extended power failure. Additionally, the UPS automatically restarts upon power being restored.

    • IEC Outlets
    • Power output: 1 KVA
    • Built-in super smart charger, shortens 50% of charging time
    • Excellent microprocessor control guarantees high reliability
    • Boost and buck AVR for voltage stabilization
    • Auto restart while AC is recovering
    • Pure sine wave output
    • Off-mode charging
    • Cold start function
    • USB communication port and RJ-45 Protection
    • LCD Display
    • IEC outlets

    Includes:

    • Software CD & USB Lead
    • User Manuals
    • Mains Lead UK/Schuko IEC60320 C13 1.5m
    • IEC60320 C13/14 Loop Cable

    Battery Replacement

    This model uses two Yuasa NPW36-12 blocks.

  • Call for Price
    UPS20001

    1.5 KVA / 1350 W Online UPS System

    This model is a fully featured online double conversion UPS System with 1500VA and 1350W rating that can be rack mounted in a 19″ rack, or vertical standing with supplied support brackets.

    A comprehensive LCD display gives full UPS status and can be electronically rotated for viewing in either horizontal or vertical orientations.

    ECO mode can be enabled to improve operational efficiency safe in the knowledge that should the mains go out of limits the inverter will immediately take over.

    The rear panel allows for full IEC power distribution, with load shedding when on battery for non-essentail load, an Emergency Power Off Mode for safety, RS232 and USB interface for monitoring and control via a computer and an intelligent port for network monitoring via SNMP or a dry contact card can be fitted for connection to a Building Management System

    The front access internal battery pack allows for easy replacement of batteries, and this can be done live without having to power down the load for maximum uptime.

    Up to 4 additional matching battery cabinets can be added to substantially increase the available run time.

    • Power output: 1.5 KVA / 1350 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Hot Swappable Front Access Battery Tray allowing for simple maintenance
    • Electronic Rotatable LCD allowing easy reading in both horizontal and vertically mounted
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • Rack Ears
    • Vertical Support Brackets
    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS30003

    10 KVA / 9000 W UPS System

    Please note the following important points:

    • Due to the weight, this product is ineligible for free shipping as it needs to be shipped as freight.
    • Delivery will be by palletised courier and we can only drop off at kerbside / ground floor locations.
    • The item is heavy and will require a two man lift or assisted handling

    Fully featured 10KVA, 9KW Rated single phase online double conversion UPS in compact tower format. Unit contains 20x12V 9Ah internal batteries and runtime can be extended with the addition of matching battery cabinets.

    This product features a unique removable bypass box to allow service and maintenance of the UPS with minimal risk of downtime and without the need for a seperate wrap around bypass facility.

    We can supply this product fitted with industrial plug and socket if required for an additional charge.

    High Frequency design provides the highest degrees of power protection and performance.

    Suitable for a wide range of applications.

    • Power output: 10 KVA / 9000 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Removable and Integrated Bypass
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • UPSilon2000 Software
    • Data Lead
    • User Manuals
  • Call for Price
    UPS60004

    10 KVA Isolated UPS System

    Fully featured online double conversion UPS Systems with built-in isolation transformers offering the best available power protection technology.

    • Power output: 10 KVA
    • Capacity can be extended or reliability improved by connecting the 6 or 10KVA units in parallel
    • Overload minimised with high output power factor of 0.9 or 1.0
    • Comprehensive LCD display, allows full control over unit parameters and at-aglance indication of unit status
    • True online double conversion topology ensures high quality power waveform, adjustable output voltage and frequency conversion mode

    SPECIFICATION

    • Input Voltage Range: 180~300VAC (Full Load) 130VAC~300VAC (<60% Load)
    • Input Frequency Range: 46~54Hz (50Hz System) 56~64Hz (60Hz System)
    • Input Phase: Single Phase w Ground
    • Input Power Factor:: ≥0.98 @ 100% Load
    • Output Voltage: 208/220/230/240VAC
    • Output AC Voltage Regulation: ±1% (Battery)
    • Output Frequency (Synchronised): As input
    • Output : 50±0.1Hz or 60±0.1Hz
    • Waveform: Pure Sinewave
    • Efficiency AC Mode: ≥88%
    • Efficiency ECO Mode: TBA
    • Efficiency Battery Mode: ≥88%
    • Battery Type: 12V / 9Ah
    • Number of Batteries: 20
    • Charge Current: 1A
  • Call for Price
    UPS10003

    2 KVA Sine Wave UPS System

    The VIS-B range utilises digital Line Interactive, (VI) technology with a digitized PWM-based controller providing a pure sinewave (S) output, (VI+S = VIS) making it perfect for sensitive applications where pure power is required.

    As offline & square wave UPS don't provide the level of protection you may require – or are incompatible with your load- and online is too noisy, expensive or inefficient, the VIS series is an ideal product.

    The VIS-B includes an AVR (Automatic Voltage Regulator) as standard, making the UPS enormously effective even in poor mains supply conditions. The wide input voltage window regulates the output voltage to within safe limits without switching to battery power, even if the input voltage fluctuates by as much as 30% from normal. This feature extends battery life and ensures the batteries are in optimal condition, fully charged and ready to offer maximum runtime should the mains power fail.

    The VIS-B features RJ45 surge protection for connection of an Ethernet cable to prevent surges on network lines entering the system through backdoor routes, and UK outlets to connect all equipment without the use of adapters required for IEC output devices. An LCD screen is incorporated displaying connected load and battery charge levels, input and output voltages and warnings for overload and fault conditions.

    The provided software (or free download) enables intelligent shut-down and monitoring of the UPS via USB or RS232 interface. The software enables UPS start-up and shut-down programming, logging and email messaging (alerting users to the UPS status across the local network). The software is compatible with most operating systems, providing a safe shut down in the event of an extended power failure. Additionally, the UPS automatically restarts upon power being restored.

    • Power output: 2 KVA
    • Built-in super smart charger, shortens 50% of charging time
    • Excellent microprocessor control guarantees high reliability
    • Boost and buck AVR for voltage stabilization
    • Auto restart while AC is recovering
    • Pure sine wave output
    • Off-mode charging
    • Cold start function
    • USB communication port and RJ-45 Protection
    • LCD Display
    • UK socket outlets

    Includes:

    • Software CD & USB Lead
    • User Manuals
  • Call for Price
    UPS20003

    3 KVA / 2700 W Extended Run Online UPS System

    This model is a fully featured online double conversion UPS System with 3KVA and 2700W rating that can be rack mounted in a 19″ rack, or vertical standing with supplied support brackets.

    This unit does not contain internal batteries. It is designed for connection to a large battery bank for long runtime application. Recharge time is significantly reduced thanks to the internal 12A charger.

    A comprehensive LCD display gives full UPS status and can be electronically rotated for viewing in either horizontal or vertical orientations.

    ECO mode can be enabled to improve operational efficiency safe in the knowledge that should the mains go out of limits the inverter will immediately take over.

    The rear panel allows for full IEC power distribution, with load shedding when on battery for non-essentail load, an Emergency Power Off Mode for safety, RS232 and USB interface for monitoring and control via a computer and an intelligent port for network monitoring via SNMP or a dry contact card can be fitted for connection to a Building Management System

    The front access internal battery pack allows for easy replacement of batteries, and this can be done live without having to power down the load for maximum uptime.

    • Power output: 3 KVA / 2700 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Hot Swappable Front Access Battery Tray allowing for simple maintenance
    • Electronic Rotatable LCD allowing easy reading in both horizontal and vertically mounted
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • Rack Ears
    • Vertical Support Brackets
    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS20002

    3 KVA / 2700 W Online UPS System

    This model is a fully featured online double conversion UPS System with 3 KVA and 2700 W rating that can be rack mounted in a 19″ rack, or vertical standing with supplied support brackets.

    A comprehensive LCD display gives full UPS status and can be electronically rotated for viewing in either horizontal or vertical orientations.

    ECO mode can be enabled to improve operational efficiency safe in the knowledge that should the mains go out of limits the inverter will immediately take over.

    The rear panel allows for full IEC power distribution, with load shedding when on battery for non-essentail load, an Emergency Power Off Mode for safety, RS232 and USB interface for monitoring and control via a computer and an intelligent port for network monitoring via SNMP or a dry contact card can be fitted for connection to a Building Management System

    The front access internal battery pack allows for easy replacement of batteries, and this can be done live without having to power down the load for maximum uptime.

    • Power output: 3 KVA / 2700 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Hot Swappable Front Access Battery Tray allowing for simple maintenance
    • Electronic Rotatable LCD allowing easy reading in both horizontal and vertically mounted
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • Rack Ears
    • Vertical Support Brackets
    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS30002

    3 KVA / 2700 W Online UPS System (Compact tower format)

    Fully featured online double conversion UPS in compact tower format. Unit contains 6x12V 9Ah internal batteries but runtime can be extended with the addition of matching battery cabinets.

    High Frequency design provides the highest degrees of power protection and performance.

    Suitable for a wide range of applications.

    • Power output: 3 KVA / 2700 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • High power factor of 0.9 reducing possibility of overload and offering maximum compatibility
    • Three Stage Battery Charger increases battery service life and optimises recharge time
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS60002

    3 KVA Isolated UPS System

    Fully featured online double conversion UPS Systems with built-in isolation transformers offering the best available power protection technology.

    • Power output: 3 KVA
    • Capacity can be extended or reliability improved by connecting the 6 or 10KVA units in parallel
    • Overload minimised with high output power factor of 0.9 or 1.0
    • Comprehensive LCD display, allows full control over unit parameters and at-aglance indication of unit status
    • True online double conversion topology ensures high quality power waveform, adjustable output voltage and frequency conversion mode

    SPECIFICATION

    • Input Voltage Range: 180~300VAC (Full Load) 130VAC~300VAC (<60% Load)
    • Input Frequency Range: 46~54Hz (50Hz System) 56~64Hz (60Hz System)
    • Input Phase: Single Phase w Ground
    • Input Power Factor:: ≥0.98 @ 100% Load
    • Output Voltage: 208/220/230/240VAC
    • Output AC Voltage Regulation: ±1% (Battery)
    • Output Frequency (Synchronised): As input
    • Output : 50±0.1Hz or 60±0.1Hz
    • Waveform: Pure Sinewave
    • Efficiency AC Mode: ≥82%
    • Efficiency ECO Mode: ≥85%
    • Efficiency Battery Mode: ≥90%
    • Battery Type: 12V/9Ah
    • Number of Batteries: 6
    • Charge Current: 1-4A
  • Call for Price
    UPS20004

    6 KVA / 5400 W Extended Run Rack/Tower UPS

    This model is a true online double conversion UPS System in a rack/tower format.

    The unit does not contain internal batteries and has the option of being connected to one or more matching battery cabinets or a high capacity battery bank.

    The unit can be configured for 196-240V battery strings allowing the unit to be used in conjunction with our B16 battery cabinet with 100Ah batteries or the 240V matching BP6000 battery cabinets for an all in one rackmounted solution.

    The unit has hardwired input and output terminals in secure glanded enclosures, as well as 2x 10A IEC outlet sockets for convenience.

    • Power output: 6 KVA / 5400 W
    • High frequency, double conversion on-line technology providing the highest degrees of power protection
    • Electronic Rotatable LCD allowing easy reading in both horizontal and vertically mounted
    • Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life
    • Cold start function allowing power to be provided without utility being present
    • Selectable ECO mode for high efficiency operation saving on operating costs
    • Automatic battery charge in UPS off mode
    • Automatic fan speed control with load variation giving minimal noise
    • Emergency Power Off facility for safety
    • Smart USB / RS232 communications with monitoring software
    • Programmable load shedding in battery mode

    Options:

    • Optional relay or SNMP communications card through Intelligent Slot for full communications
    • Additional Battery Packs can be added to extend runtime

    Includes:

    • UPSilon2000 Software
    • Input & Output Leads
    • Data Lead
    • User Manuals
  • Call for Price
    UPS60003

    6 KVA Isolated UPS System

    Fully featured online double conversion UPS Systems with built-in isolation transformers offering the best available power protection technology.

    • Power output: 6 KVA
    • Capacity can be extended or reliability improved by connecting the 6 or 10KVA units in parallel
    • Overload minimised with high output power factor of 0.9 or 1.0
    • Comprehensive LCD display, allows full control over unit parameters and at-aglance indication of unit status
    • True online double conversion topology ensures high quality power waveform, adjustable output voltage and frequency conversion mode

    SPECIFICATION

    • Input Voltage Range: 180~300VAC (Full Load) 130VAC~300VAC (<60% Load)
    • Input Frequency Range: 46~54Hz (50Hz System) 56~64Hz (60Hz System)
    • Input Phase: Single Phase w Ground
    • Input Power Factor:: ≥0.98 @ 100% Load
    • Output Voltage: 208/220/230/240VAC
    • Output AC Voltage Regulation: ±1% (Battery)
    • Output Frequency (Synchronised): As input
    • Output : 50±0.1Hz or 60±0.1Hz
    • Waveform: Pure Sinewave
    • Efficiency AC Mode: ≥88%
    • Efficiency ECO Mode: TBA
    • Efficiency Battery Mode: ≥88%
    • Battery Type: 12V / 7Ah
    • Number of Batteries: 20
    • Charge Current: 1A
  • Call for Price
    UPS30006

    BP10KT Battery Cabinet

    This battery cabinet is designed for use with the VFI-KT series Tower / Free Standing Uninterruptible Power Supply.

    This model is compatible with the UPS30003 UPS system.

    Please note the following important points:

    • Once fully assembled this product weighs approximately 120kg. You will need to be able to lift this from the pallet. This is a 4-5 man lift, or requires the use of lifting equipment.
    • We can send the unit out in kit form for on-site assembly if required.
    • We can quote for on site assembly and installation if required, please contact us regarding this.

    Please indicate in the order comments your preferences for the above.

    • Battery pack for use with VFI-KT Series UPS
    • Capability for multiple expansion without extending recharge time
    • Daisy chain touch proof connectivity for ease of expansion
    • Rugged construction for durability and longevity
    • 3-5 year design life VRLA maintenance free batteries
  • Call for Price

    Enclosed Battery Cabinet – 192 V / 100 Ah

    Flat packed, robust enclosed (cladded) battery cabinet. Easy to assemble with minimal bolts and screws.Supplied with 16x 12V 100Ah 10 year design life blocks and interconnects

    This product is compatible with the VFI6000BL.

    • Vented Enclosure
    • Robust Steel Construction
    • Easy to Assemble
    • Welded Steel shelves lock into place
    • Covers slot into place
    • Up to 3 circuit breakers can be fitted
    • Input & Output Gland Holes for Daisy Chaining cabinets
    • Left or Right Hand Cable Entry
  • Call for Price

    Enclosed Battery Cabinet – 72 V / 100 Ah

    Power Inspired B8 cabinet supplied in kit form complete with 6x 6FM100E-X battery blocks and battery interconnects.

    Wired in 72Vdc single string configuration.

    Supplied in kit form and requires on site assembly.

    For use in long runtime applications with the VFI3000BL

    Dimensions: 470mm (W) x 800mm (D) 617mm (H)

  • Call for Price

    Enclosed Battery Cabinet – 72 V / 200 Ah

    Flat packed, robust enclosed (cladded) battery cabinet. Easy to assemble with minimal bolts and screws.Supplied with 12x 12V 100Ah 10 year design life blocks and interconnects for connection in 72V, 200Ah configuration.

    This product is compatible with the VFI3000BL.

    • Vented Enclosure
    • Robust Steel Construction
    • Easy to Assemble
    • Welded Steel shelves lock into place
    • Covers slot into place
    • Up to 3 circuit breakers can be fitted
    • Input & Output Gland Holes for Daisy Chaining cabinets
    • Left or Right Hand Cable Entry
  • Call for Price
    UPS30005

    Extended Run Battery Cabinet – 72 V / 18 Ah

    Designed for use with the VFI-T series Tower / Free Standing Uninterruptible Power Supply, these matching battery cabinets have their own integral AC charger, allowing multiple packs to be added without affecting recharge time.

    This model is compatible with the UPS30002 Online UPS System (compact tower format).

    • 72V / 18Ah
    • Modular battery pack for use with VFI-T Series UPS
    • Battery circuit breaker for protection and isolation
    • Internal charger for reduced recharge time
    • Capability for multiple expansion without extending recharge time
    • Daisy chain touch proof connectivity for ease of expansion
    • Rugged construction for durability and longevity
    • 3-5 year design life VRLA maintenance free batteries

    Includes:

    • Battery Connection Lead
    • Mains Lead
  • Call for Price
    UPS20005

    Extension Battery Pack – 36 V / 18 Ah

    Designed for use with the VFI-B series Uninterruptible Power Supply, these matching battery packs have their own integral AC charger, allowing the cabinets to be fast charged if required.

    This model is compatible with the UPS20001 online UPS.

    • Modular battery pack for use with VFI-B Series UPS
    • 19in rack mounting or slim tower format
    • Battery circuit breaker for protection and isolation
    • Internal charger for reduced recharge time
    • Capability for multiple expansion without extending recharge time
    • Optimised and compact giving high capacity in 2U height
    • Daisy chain touch proof connectivity for ease of expansion
    • Rugged construction for durability and longevity
    • 3-5 year design life VRLA maintenance free batteries

    Includes:

    • Mains Lead
    • Battery Connection Lead