Showing 1361–1380 of 1389 results

  • £490.00
    SOL-4668

    Solaris[PRO] UV Sterilisation Device (2-5 litre)

    Protects your HPLC

    HPLC Instrumentation are easily adversely affected by bacteria, fungi and algae. By removing the threat of contaminated buffer sitting in-line, the SOLARIS[PRO] keeps your system well conditioned, thus avoiding expensive downtime and engineer call-outs.

    Toxic chemicals no longer required

    SOLARIS[PRO] supersedes the requirement for algae inhibitors, such as Sodium Azide, which affect chromatography.

    Sealed environment

    SOLARIS[PRO] sterilises the solvent after the bottle is filled. By utilising a 0.2 μm air intake filter, biological pathogens cannot form. In addition, contamination with particles from the laboratory environment (e.g. dust) is also prevented.

    Savings: Time and cost

    Solaris looks after itself – by having the lamp continuously switched on, man hours are considerably reduced and process efficiency maximised; no wasted solvent, no solvent disposal, no down time while new buffer is created, no associated buffer / preservative costs.

    Easy to handle

    • The system comes ready to use and can be mounted on all 2 litre -5 litre solvent bottles with a GL-45 thread.
    • Easy to install and to replace.
    • Cleaning: Simply rinse with deionised water.

    * Important note – power supply sold separately – buy here

  • £11.00
    A290012

    Spare 1/16

    Spare 1/16″ Cutting Wheel for Stainless Steel Tubing Cutter for 1/16″ Tube (part number A290011)

  • £8.00
    A200010

    Stainless Steel Tubing 1/16″ OD, 0.010″ ID

    For use with chromatography systems.

    • Priced by the metre*
    • 1/16″ OD
    • Tolerance (inches): ±0.0010
    • Made from 316-type stainless steel as fitted by Original Equipment Manufacturers (OEMs)
    • 0.010″/0.254mm ID
    • High quality chromatographic grade seamless drawn tubing
    • The use of 316 type offers superior chloride ion resistance
    • Rated for use between -53 and +280 degrees centigrade
    • High tolerance inside and outside diameters ensures trouble free use
  • £8.00
    A200011

    Stainless Steel Tubing 1/16″ OD, 0.020″ ID

    For use with chromatography systems.

    • Priced by the metre*
    • 1/16″ OD
    • Tolerance (inches): ±0.0010
    • Made from 316-type stainless steel as fitted by Original Equipment Manufacturers (OEMs)
    • 0.020″/0.508mm ID
    • High quality chromatographic grade seamless drawn tubing
    • The use of 316 type offers superior chloride ion resistance
    • Rated for use between -53 and +280 degrees centigrade
    • High tolerance inside and outside diameters ensures trouble free use
  • £8.00
    A200012

    Stainless Steel Tubing 1/16″ OD, 0.030″ ID

    For use with chromatography systems.

    • Priced by the metre*
    • 1/16″ OD
    • Tolerance (inches): ±0.0010
    • Made from 316-type stainless steel as fitted by Original Equipment Manufacturers (OEMs)
    • 0.030″/0.762mm ID
    • High quality chromatographic grade seamless drawn tubing
    • The use of 316 type offers superior chloride ion resistance
    • Rated for use between -53 and +280 degrees centigrade
    • High tolerance inside and outside diameters ensures trouble free use
  • £8.00
    A200013

    Stainless Steel Tubing 1/16″ OD, 0.040″ ID

    For use with chromatography systems.

    • Priced by the metre*
    • 1/16″ OD
    • Tolerance (inches): ±0.0010
    • Made from 316-type stainless steel as fitted by Original Equipment Manufacturers (OEMs)
    • 0.040″/1.016mm ID
    • High quality chromatographic grade seamless drawn tubing
    • The use of 316 type offers superior chloride ion resistance
    • Rated for use between -53 and +280 degrees centigrade
    • High tolerance inside and outside diameters ensures trouble free use
  • £109.00
    A290011

    Stainless Steel Tubing Cutter for 1/16

    Stainless Steel Tubing Cutter for 1/16″ Tube

  • £3.00
    A110011

    Stainless Steel Waters style Compression Screw (for 1/16

    Stainless Steel Waters style Compression Screw (for 1/16″ OD Tubing).

    Precision machined from high quality type 316 stainless steel to ensure leak tight connections at system pressures up to 6000 psi.

  • £2.00
    A110012

    Stainless Steel Waters style Ferrule for 1/16″ O.D. Tu...

    Stainless Steel Waters style ferrule (for 1/16″ OD tubing).

    Precision machined from high quality type 316 stainless steel to ensure leak tight connections at system pressures up to 6000 psi.

  • £140.00
    A403014

    Stator Face Assembly for Agilent G1313A / G1329A

    Stator face assembly for Agilent autosamplers (1100 / 1200 / 1260 / G1313A & G1329A).

  • £68.00
    A300630B

    Syringe Filter, 0.45µm, 30mm PES

    Pack Size: 100

    • Used in sample preparation of aqueous solutions
    • Naturally hydrophilic and low protein binding.
    • Sterilizes biological fluids, serums or tissue culture media additives
    • Fast flow rate and high throughout.
    • High through-puts when sterilizing or clarifying viscous proteinaceous solutions
  • £995.00
    A500100-1

    THF 1 Channel, 480µL Solvent Degasser

    THF resistant chamber (as standard), 480µL internal volume, 1 channel kromega Solvent Degasser.

    • Communicates with 1100 and 1200 systems in exactly the same way that a G1322 / G1379 does
    • THF resistant
    • Long life – 5 years continuous run times
    • Quicker vac down times
    • 1 channel
    • Internal channel volume of only 480µL
    • DuPont / Teflon AF membrane
    • Eliminates baseline fluctuations due to the vacuum pump
    • Closed loop vacuum control means constant vacuum (variable RPM)
    • Advanced error & leak checking functions
    • Short vacuum pull-down times, typically 3 mins
    • Removes pre-bubbles formed by cavitation vs bubbles formed by off-the-floor eluent reservoirs
    • Extremely quiet operational noise
    • Wetted parts – PEEK & Teflon AF
    • Integrates into any HPLC system
  • £1,295.00
    A500100-2

    THF 2 Channel Degasser, 480µL

    THF resistant chambers (as standard), 480µL internal volume, 2 channel kromega Solvent Degasser.

    • Communicates with 1100 and 1200 systems in exactly the same way that a G1322 / G1379 does
    • THF resistant
    • Long life – 5 years continuous run times
    • Quicker vac down times
    • 2 channels (independent chambers, so if one were to fail, can be economically repaired)
    • Internal channel volume of only 480µL
    • DuPont / Teflon AF membrane
    • Eliminates baseline fluctuations due to the vacuum pump
    • Closed loop vacuum control means constant vacuum (variable RPM)
    • Advanced error & leak checking functions
    • Short vacuum pull-down times, typically 3 mins
    • Removes pre-bubbles formed by cavitation vs bubbles formed by off-the-floor eluent reservoirs
    • Extremely quiet operational noise
    • Wetted parts – PEEK & Teflon AF
    • Integrates into any HPLC system
  • £1,495.00
    A500100-3

    THF 3 Channel, 480µL Solvent Degasser

    THF resistant chambers (as standard), 480µL internal volume, 3 channel kromega Solvent Degasser.

    • Communicates with 1100 and 1200 systems in exactly the same way that a G1322 / G1379 does
    • THF resistant
    • Long life – 5 years continuous run times
    • Quicker vac down times
    • 3 channels (independent chambers, so if one were to fail, can be economically repaired)
    • Internal channel volume of only 480µL
    • DuPont / Teflon AF membrane
    • Eliminates baseline fluctuations due to the vacuum pump
    • Closed loop vacuum control means constant vacuum (variable RPM)
    • Advanced error & leak checking functions
    • Short vacuum pull-down times, typically 3 mins
    • Removes pre-bubbles formed by cavitation vs bubbles formed by off-the-floor eluent reservoirs
    • Extremely quiet operational noise
    • Wetted parts – PEEK & Teflon AF
    • Integrates into any HPLC system
  • £1,695.00
    A500100-4

    THF 4 Channel, 480µL Solvent Degasser

    THF resistant chambers (as standard), 480µL internal volume, 4 channel kromega Solvent Degasser.

    • Communicates with 1100 and 1200 systems in exactly the same way that a G1322 / G1379 does
    • THF resistant
    • Long life – 5 years continuous run times
    • Quicker vac down times
    • 4 channels (independent chambers, so if one were to fail, can be economically repaired)
    • Internal channel volume of only 480µL
    • DuPont / Teflon AF membrane
    • Eliminates baseline fluctuations due to the vacuum pump
    • Closed loop vacuum control means constant vacuum (variable RPM)
    • Advanced error & leak checking functions
    • Short vacuum pull-down times, typically 3 mins
    • Removes pre-bubbles formed by cavitation vs bubbles formed by off-the-floor eluent reservoirs
    • Extremely quiet operational noise
    • Wetted parts – PEEK & Teflon AF
    • Integrates into any HPLC system
  • £9.00
    A290013

    Tubing Cutter for Polymer Tube

    • Compact size is convenient to transport and ideal for lab tubing
    • Produces clean right angle cuts
    • Jaw is spring loaded – closes automatically
  • £115.00
    A410065

    UPLC Check Valve (Cartridge Only) for Waters Acquity I2V Pum...

    A UPLC check valve (cartridge only) for Waters Acquity I2V and I-Class BSM pumps.

  • £125.00
    A410063

    UPLC Primary Check Valve for Waters Acquity BSM Pumps

    A UPLC primary check valve for Waters Acquity and NanoAcquity BSM pumps.

  • £69.00
    CRM-1003

    UV Absorbance Linearity Standards

    UKAS reference materials manufacturerUsed to qualify UV/DAD detector absorbance linearity.

  • £59.00
    CRM-1002

    UV Low Wavelength Standards

    UKAS reference materials manufacturerThese UV low wavelength standards are designed to qualify UV/DAD detectors in the low UV region.