Rephile Water Purification Systems for the Lab

Jaytee distribute and support the Rephile range of Water Purification systems in the UK and Ireland.

About Rephile

RephiLe Bioscience Ltd designs and manufactures innovative and high quality purification based products for biotechnology and life science laboratories. The range includes pure water systems and consumables, and other filtration and purification based products.
Technology platforms include the most advanced technologies and continuous electro-deionization (CEDI) technologies to meet the needs of various laboratories and pilot production requirements: high product water quality that meets or exceeds ASTM, CLSI and CAP standards, stable performance, easy to manage at economical costs.

Filtration Systems

Whether you require Type I, Type II, ultrapure, RO or specific filtration in your laboratory application, Rephile have a solution for you. Not only do they manufacture standard flow systems, they have also created a high-flow range for both RO and EDI standards.

The range includes:

  • PURIST® Ultrapure – Type I water from RO, distilled or deionised water. Full systems from only £3,370
  • Direct-Pure® UP – Ultrapure and reverse osmosis water from tap water directly. Full systems from only £5,243
  • Direct-Pure® EDI – Type II water from tap water directly. Full systems from only £5,223
  • Direct-Pure® RO – Reverse osmosis lab grade water from tap water directly. Full systems from only £2,667
  • Direct-Pure® Adept – Type I ultrapure and RO water on demand from tap water directly. Full systems from only £3,508
  • Direct-Pure® Genie – Type I and Type II pure water from tap water directly in a single unit. Full systems from only £8,507
  • Large Direct-Pure® RO – High-flow reverse osmosis (RO) water from tap water directly. Full systems from only £7,088
  • Large Direct-Pure® EDI – High flow Type II water directly from tap directly. Full systems from only £9,699

Use the tabs at the top of this section to learn more about each product or contact us.

PURIST® Ultrapure Lab Water Systems

PURIST Ultrapure Water System from Rephile

The PURIST Ultrapure Lab Water System produces ultrapure water from EDI, reverse osmosis (RO), distilled or deionized water.

Features:

  • Automatic water recirculation every hour to prevent bacteria from growing inside the system
  • A dual UV lamp to kill bacteria and reduce organics to trace levels
  • Volumetric dispensing and calibration
  • Alarm and maintenance data presented on built-in LCD screen
  • Accommodates a selection of final filters for HPLC or to remove RNAse/ Endotoxins
  • Real-time resistivity measurement by a high-precision resistivity meter with temperature compensation (conductivity cell constant 0.01cm -1)
  • Small compact footprint
  • Ergonomically designed to ensure a simple installation, operation and easy maintenance
  • Manufacturing plant working to ISO9001:2008 standards

Main Applications:

  • Preparation/dilution of HPLC mobile phases, blanks, sample and buffers in GC, HPLC, AA, ICP-MS and other advanced analytical techniques.
  • Preparation of media for mammalian cell culture, IVF, reagents for molecular biology applications.

Specification:

Feed Water Quality
Feed Water Type
Reverse Osmosis (RO) water, Distilled water, Deionized or EDI water
Operating Temperature 5~45°C
Feed Water Pressure 0-15 psi (0-1 bar)
Product Water Flow Rate 1 – 1.5 L/min at 25°C
Product Water Quality
Resistivity 18.2 MΩ.cm at 25°C
TOC** <10 ppb (< 5 ppb with a dual wavelength UV lamp)
Particle (>0.2 µm) <1/ml (with a 0.2 μm final filter)
Micro-organisms <0.1 cfu/ml (with a 0.2 µm final filter)
Pyrogens (endotoxins) <0.001Eu/ml (with UF filter)
RNase < 0.01ng/ml (with UF filter)
DNase < 4 pg/μL (with UF filter)
**When TOC of feed water level is 50ppb.
Dimensions
Length x Depth x Height 21 cm × 36 cm × 44 cm
Net Weight (Operating Weight) 6.0 kg (10.5 kg)

System Set Up

Rephile provides complete water purification solutions
Rephile Water Softener Right arrow Rephile Direct-pure EDI Right arrow Rephile PE tank Right arrow Rephile Purist UV Water Purification System

Water Softener

Direct-Pure EDI

PE Tank

Purist / Purist UV

Ordering information

Description
Part No.
PURIST Ultrapure Water System Set – Includes:
- RephiQuatro U Pack 1 (RO feed) or 2 (SDI feed) Cartridge*  
- 0.2µm PES Capsule Filter  
*For an small additional charge, the low TOC cartridge can be specified. WP940001*
PURIST UV Ultrapure Water System Set – Includes
– RephiQuatro U Pack 1 (RO feed) or 2 (SDI feed) Cartridge*
– 0.2µm PES Capsule Filter
- UV Lamp, Duel Wavelength 185/254nm
*For an small additional charge, the low TOC cartridge can be specified. WP940002*
PURIST UV Ultrapure Water System with dispenser Set – Includes
- RephiQuatro U Pack 1 (RO feed) or 2 (SDI feed) Cartridge*
- 0.2µm PES Capsule Filter
- UV Lamp, Duel Wavelength 185/254nm
- Remote Dispenser
*For an small additional charge, the low TOC cartridge can be specified. WP940003*
* Full system prices start from just £3,370 – please contact us for full spec and costings.
Compatible Consumables
RephiQuatro U Pack 1 Cartridge (RO feed) WP050001
RephiQuatro U Pack 1 Cartridge with a 0.2µm Capsule Filter WP050002
RephiQuatro U Pack 2 Cartridge (SDI feed) WP050003
RephiQuatro U Pack 2 Cartridge with a 0.2µm Capsule Filter WP050004
RephiQuatro U Pack, Low TOC Please enquire
0.2µm PES Capsule Filter WP200001
DC Recirculation Pump, 24V DC Please enquire
Pressure Regulator WP460001
UV Lamp, Duel Wavelength 185/254nm Please enquire

For a full list of applicable consumables for the PURIST® series, please download the pdf below:

Direct-Pure® UP Lab Water Systems

Direct-Pure-UP

The Direct-Pure® UP Ultrapure & RO Lab Water System is an integrated system that produces ultrapure and reverse osmosis (RO) water from tap water directly. The quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Features

  • Electrical and water compartments are completely segregated, thus safer to operate
  • The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane and cartridge life monitoring as well as many other programs for convenient operation
  • The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures
  • Alarm and maintenance data presented on built-in LCD screen
  • Two sets of dual-column purification cartridges work sequentially to ensure thorough removal of ions and organics in water
  • The system recirculates automatically every hour to prevent microbial from growing
  • Resistivity is measured by a high-precision resistivity meter
  • Equipped with a 30-litre PE tank (upgradable to a 60-liter) and a liquid level sensor
  • A 0.2 µm final filter or ultrafiltration filter (optional) removes final contaminants
  • GMP, GLP, FDA and other certified

Applications

Ultrapure Water
RO Pure Water
  • HPLC mobile phase preparation
  • Preparation of reagent blank solution
  • As sample diluents for GC, HPLC, AA, ICP-MS and other analytical techniques
  • Preparation of buffer and culture media for mammalian cell culture
  • Preparation of molecular biology reagents, etc.
  • Glassware cleaning
  • Washing machine for glassware
  • Water bath water
  • Autoclave
  • Feed water to laboratory animals

Specification

Feed Water Quality
Tap water*  Municipal water, TDS < 1000 ppm (2000 μS/cm)
Operating Temperature  5~45 ℃
Feed Water Pressure  15 – 90 psi (1 – 6 bar)
Water Production Rate
Ultrapure water (Type I)  1.5 L/min at 25℃
RO water 10 to 30 L/h at 25℃
Product Water Quality
RO water conductivity** Typically < 20 µS/cm
Resistivity  18.2 MΩ.cm at 25°C
TOC  < 10 ppb (< 5 ppb with a dual wavelength UV lamp)
Particle (> 0.2 µm)  < 1/ml (with a 0.2 µm final filter)
Microorganisms  < 0.1 cfu/ml (with a 0.2 µm final filter)
Pyrogens (endotoxins)  < 0.001 Eu/ml (with UF filter)
RNase < 0.01ng/ml (with UF filter)
DNase < 4 pg/µL (with UF filter)
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system. Product water quality may vary depending on local feed water conditions.
Dimensions
Length x Depth x Height  30 cm × 51 cm × 48 cm
Net Weight (Operating Weight)  22 – 25 kg (25 – 32 kg)

Ordering information

Description
Catalog No.
Direct-Pure Water System, UP 10 (10 Litres/hour) WP920001*
Direct-Pure Water System, UP 15 (15 Litres/hour) WP920002*
Direct-Pure Water System, UP 20 (20 Litres/hour) WP920003*
Direct-Pure Water System, UP 30 (30 Litres/hour) WP920004*
Direct-Pure Water System, UP 50 (50 Litres/hour) WP920005*
Direct-Pure Water System, UP 10 UV (10 Litres/hour & UV filter) WP920007*
Direct-Pure Water System, UP 15 UV (15 Litres/hour & UV filter) WP920008*
Direct-Pure Water System, UP 20 UV (20 Litres/hour & UV filter) WP920009*
Direct-Pure Water System, UP 30 UV (30 Litres/hour & UV filter) WP920010*
Direct-Pure Water System, UP 50 UV (50 Litres/hour & UV filter) WP920011*
* Full system prices start from just £5,243 – please contact us for full spec and costings.

For a full list of applicable consumables for the Direct-Pure® UP series, please download the pdf below:

Direct-Pure® EDI Water Systems

Rephile direct pure EDI
The Direct-Pure EDI Lab Water System produces Type II water from tap water directly. Resistivity of the product water is above 5 MΩ·cm at 25°C which meets or exceeds Type II water quality as defined by ASTM, CAP, CLSI and ISO 3696 / BS 3997 and also complies with the Purified Water Requirements from the European and U.S. Pharmacopoeia.

Features:

  • The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost
  • The system is equipped with a safeguard cartridge to provide complete protection of RO membrane and EDI module.
  • Automatic water quality control programmes ensure EDI product water meeting or exceeding Type II water requirements
  • The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation
  • The pre-rinsing programme starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures
  • The system is equipped with a 30-liter PE tank (upgradable to a 60-liter) and a liquid level sensor and a tank vent filter with CO2 scavenger to prevent EDI water from carbon dioxide contamination
  • The handle is 360 degree-rotatable and detachable from its support for effortless and instant dispensing with maximum flexibility
  • RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements

Main Applications:

  • Type II Pure water can be used in many areas.
  • Preparation of bio-reagents.
  • Preparation of culture media.
  • Preparation of solution for chemical analysis such as HPLC, ICP etc.
  • For clinical analyzers.
  • Feed water for ultrapure water systems.
  • Medical device and equipment rinsing.
  • For serum and blood fractions.

Specification:

Feed Water Requirements
Tap Water*
Municipal water, TDS <1000 ppm (2000 µS/cm)
Operating Temperature 5~45°C
Feed Water Pressure 15-60 psi (1-4 bar)
Product Water Flow Rate Type II water at 25°C : 5 and 10 L/hr
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
Product Water Quality
Resistivity (@ 25°C) >5 MΩ.cm (typically 10 – 15MΩ.cm)
TOC** <30 ppb
Particle (>0.2 µm) <1/ml (with a 0.2 μm final filter or terminal ultrafiltration cartridge)
Micro-organisms <1 cfu/ml (with a 0.2 µm final filter or terminal ultrafiltration cartridge)
Pyrogens (endotoxins) <0.001Eu/ml (with a terminal ultrafiltration cartridge)
**Product water quality may vary due to local water feed water conditions.
Dimensions
Length x Depth x Height 303mm × 511mm × 482mm
Net Weight (Operating Weight) 22 – 25 kg (25 – 32 kg)

System Set Up

Rephile provides complete water purification solutions
Rephile Water Softener Right arrow Rephile Direct-pure EDI Right arrow Rephile PE tank Right arrow Rephile Purist UV Water Purification System

Water Softener

Direct-Pure EDI

PE Tank

Purist / Purist UV

Ordering information

Description
Part No.
Direct-Pure EDI Water System Set – Includes:
- Prefiltration kit (3-stage)
- RO Memrane
- RR300CP01 Safeguard cartridge
- 30 L PE water tank with level sensor
- Tank vent filter with CO2 scavenger
5 litres/hour WP950001*
10 litres/hour WP950002*
15 litres/hour WP950003*
Direct-Pure EDI Water System UV Set – Includes:
- Prefiltration kit (3-stage)
- RO Memrane
- RR300CP01 Safeguard cartridge
- 30 L PE water tank with level sensor
- Tank vent filter with CO2 scavenger
- System UV Lamp
5 litres/hour WP950004*
10 litres/hour WP950005*
15 litres/hour WP950006*
Direct-Pure EDI Water System UV Set with dispenser – Includes
- Prefiltration kit (3-stage)
- RO Memrane
- RR300CP01 Safeguard cartridge
- 30 L PE water tank with level sensor
- Tank vent filter with CO2 scavenger
- System UV Lamp
- Remote Dispenser
5 litres/hour WP950007*
10 litres/hour WP950008*
15 litres/hour WP950009*
* Full system prices start from just £5,223 – please contact us for full spec and costings.
Compatible Consumables
Cartridges and Final Filters
RephiDup P Pack Safeguard cartridge Please enquire
0.2µm PES Capsule Filter WP200001
Tanks and Accessories
30L PE Tank with tank level sensor Please enquire
60L PE Tank with tank level sensor Please enquire
Tank UV Sanitation Module with Controller, 230V Please enquire
Tank UV Lamp 254nm (For sanitation module) Please enquire
Tank vent filter with CO2 scavenger Please enquire
30L Tank Level Sensor for D-Pure, 351mm Please enquire
60L Tank Level Sensor for D-Pure, 626mm Please enquire

For a full list of applicable consumables for the Direct-Pure® EDI series, please download the pdf below:

Direct-Pure® RO Water Systems

Rephile Direct Pure RO
The Direct-Pure® RO lab water system produces reverse osmosis (RO) water from tap water directly.

Features:

  • The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
  • The pre-rinsing program starts automatically once a new RO membrane is installed so there is no need for user to set additional cleaning procedures.
  • Inferior quality of RO permeate is automatically rejected until its quality meets the requirements, which ensures the water in the reservoir is always at optimal quality.
  • Electrical and water compartments are completely segregated, thus safer to operate.
  • User can set water dispensing time for easy water collection.
  • RO product water can be dispensed from the water system directly.
  • The system can be fitted with a 30 or 60-litre PE tank with a liquid level sensor and a tank vent filter with CO2 scavenger to preserve pure water from the air contamination.
  • RephiLe can provide full document support to meet user’s GMP, GLP, FDA and other certification requirements.
  • The system is CE and RoHS certified, manufactured in an ISO 9001:2008 certified manufacturing site.

Main Applications:

  • Type II Pure water can be used in many areas.
  • Preparation of bio-reagents.
  • Preparation of culture media.
  • Preparation of solution for chemical analysis such as HPLC, ICP etc.
  • For clinical analyzers.
  • Feed water for ultrapure water systems.
  • Medical device and equipment rinsing.
  • For serum and blood fractions.

Specification:

Feed Water Requirements
Tap Water*
Municipal water, TDS <1000 ppm (2000 µS/cm)
Operating Temperature 5~45°C
Feed Water Pressure 15-90 psi (1-6 bar)
Product Water Flow Rate RO water @ 25°C: 10, 15, 20, 30, 50 L/hr
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
RO Rejection Rate
RO Water conductivity Typically <20 µS/cm
Monovalent ions removal >95%
Polyvalent ions removal >99%
Bacteria and Particles removal >99%
Organics and Pyrogens removal >99%
Dimensions
Length x Depth x Height 303mm × 511mm × 482mm
Net Weight 18 – 21 kg

Ordering information

Description
Part No.
Direct-Pure RO Water System Set – Includes:
- Main system
- Pre-filtration kit (three stage)
- RO Memrane (pre-installed)
- 30 L PE water tank with liquid level sensor
- Tank vent filter with CO2 scavenger
10 litres/hour WP960001*
15 litres/hour WP960002*
20 litres/hour WP960003*
30 litres/hour WP960004*
50 litres/hour WP960005*
2-Pass @ 10 litres/hour WP960006*
* Full system prices start from just £2,667 – please contact us for full spec and costings.
Direct-Pure RO Water System Set with Remote Dispenser – Includes:
- Main system
- Pre-filtration kit (three stage)
- RO Memrane (pre-installed)
- 30 L PE water tank with liquid level sensor
- Tank vent filter with CO2 scavenger
- Remote Dispenser
10 litres/hour WP960007**
15 litres/hour WP960008**
20 litres/hour WP960009**
30 litres/hour WP960010**
50 litres/hour WP960011**
** Full system prices start from just £3,318 – please contact us for full spec and costings.

For a full list of applicable consumables for the Direct-Pure® RO series, please download the pdf below:

Direct-Pure® adept Water Systems

Rephile Direct Pure Adept
The Direct-Pure® adept Ultrapure lab water system produces ultrapure (or RO) water.

The small foot print provides an ideal choice for users who need up to 20 litres of ultrapure water or RO water per day. Quality of ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Features:

  • The compact system provides an easy way to produce ultrapure water and RO water on demand from tap water directly with no additional pre-treatment filters.
  • The system is equipped with a safeguard RephiDuo P Pack cartridge and a dual-column RephiDuo U Pack ultrapurification cartridge to ensure optimum quality of the final produced water.
  • No external storage tank is required, eliminating the risk of water degration by contaminants from the container or the tubing.
  • The fully automatic controlled and maintained system contains automatic cleaning cycles and self-maintenance functions for the RO membrane, increasing the lifetime and efficiency of the RO membranes as well as the cartridges.
  • Automatic hourly system recirculation in the loop prevents bacterial growth and maintain water purity at all times.
  • RO product water can be dispensed from the water system directly.
  • System status and key quality parameters are clearly displayed on large LCD screen for easy system performance monitoring.

Main Applications:

  • HPLC mobile phase preparation.
  • Preparation of reagent blank solution.
  • Preparation of culture media.
  • As sample diluents for GC, HPLC, AA, ICP-MS and other analytical techniques.
  • Preparation of buffer and culture media for mammalian cell culture.
  • Preparation of molecular biology reagents, etc.

Specification:

Feed Water Requirements
Tap Water
Municipal water, TDS <500 ppm (1000 µS/cm)
Operating Temperature 5-45°C
Feed Water Pressure 15-90 psi (1-6 bar)
Product Water Flow Rate RO water @ 25°C: >0.5 L/min
Ultrapure water (Type I) @ 25°: >0.5 L/min
Product Water Quality
RO Water conductivity (@ 25°C) Typically <20 µS/cm
Ultrapure water resisivity (@ 25°C) 18.2 MΩ .cm
TOC* < 10 ppb (< 5 ppb with a dual wavelength UV lamp)
Particles in ultrapure water (> 0.2µm) <1/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Microorganisms <0.1 cfu/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Pyrogens (endotoxins) <0.001 Eu/ml (with a terminal ultrafiltration cartridge)
* Product water quality may vary due to local feed water conditions.
Dimensions
Length x Depth x Height 303mm × 511mm × 482mm

Ordering information

Description
Part Number.
Direct-Pure adept Water System Set – Includes:
- Main system
- RephiDuo P Pack Safeguard cartridge
- RephiDuo U Pack Cartridge with a 0.2µm Capsule Filter
- Leak protector WP910001*
Direct-Pure adept UV Water System Set – Includes:
- Main system
- RephiDuo P Pack Safeguard cartridge
- RephiDuo U Pack Cartridge with a 0.2µm Capsule Filter
- Leak protector
- UV Lamp WP910002*
* Full system prices start from just £3,508 – please contact us for full spec and costings.

For a full list of applicable consumables for the Direct-Pure® adept series, please download the pdf below:

Direct-Pure® Genie Water Systems

Rephile Direct Pure Genie

Produces Type I ultrapure and Type II pure water from tap water in a single unit.

This integrated water system combines optimized sequence of water purification, delivery and monitoring technologies without compromising product water quality in a compact unit. It offers desired solutions for research professionals who work with varieties of applications utilizing Type I ultrapure and Type II pure water in the lab.

The system is manufactured in an ISO 9001 : 2008 certified manufacturing site and CE and RoHS marked.

Features:

  • Automatic cleaning cycles and self-maintenance functions for the RO membrane increase the lifetime and efficiency of the RO membranes, EDI module as well as the final polishing cartridge.
  • Automatic hourly recirculation in the loop prevents bacteria growth and maintain water purity at all times..
  • Flexible choices of final filters to remove specific contaminants for multiple applications.
  • Large LCD screens on both the water system and the remote dispenser display critical information for instant access of system operation and performance parameters.
  • EDI product water (Type II pure water) can be dispensed from both the water production unit and the reservoir, while ultrapure
    water is simply drawn at the push of a button on the handle of the water dispenser.

Main Applications:

with Ultrapure Water:

  • HPLC mobile phase preparation.
  • Preparation of reagent blank solution.
  • As sample diluents for GC, HPLC, AA, ICP-MS and other analytical techniques.
  • Preparation of buffer and culture media for mammalian cell culture.
  • Preparation of molecular biology reagents, etc.

with EDI Water:

  • Preparation of chemical and bio-reagents.
  • Preparation of culture media.
  • Preparation of solutions for chemical analysis such as HPLC and ICP.
  • For clinical analyzers.
  • Medical device and equipment rinsing.
  • For serum and blood fractionation.
  • For ophthalmics.

Specification:

Feed Water Requirements
Tap Water
Municipal water, TDS < 1000 ppm (2000 µS/cm)
Operating Temperature 5-45°C
Feed Water Pressure 15-90 psi (1-6 bar)
Water Production Flow Rate
EDI water (Type II) 5, 10, 15 L/hr
Ultrapure water (Type I) 1.5 L/min
Product Water Quality
EDI Water resistivity (@ 25°C) 5 MΩ .cm (typically 10-15 MΩ .cm)
Ultrapure water resisivity (@ 25°C) 18.2 MΩ .cm
TOC < 5 ppb
Particles in ultrapure water (> 0.2µm) <1/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Microorganisms <1 cfu/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Pyrogens (endotoxins) <0.001 Eu/ml (with a terminal ultrafiltration cartridge)
Dimensions
Length x Depth x Height 303mm × 511mm × 482mm

Ordering information

Description
Part No.
Direct-Pure Genie Water System Set – Includes:
- Main system
- RephiDuo P Pack
- RephiDuo U Pack with a 0.22µm final Filter
- Remote Dispenser for Ultrapure Water
- 30 Litre PE Tank with liquid level sensor
- Tank Vent Filter with CO2 scavenger
- UV Lamp, Dual Wavelength 185/254nm(pre-install)
- UV Lamp 254 nm (pre-install)
5 Litres/hour WP930001*
10 Litres/hour WP930002*
15 Litres/hour WP930003*
* Full system prices start from just £8,507 – please contact us for full spec and costings.

Direct-Pure® RO Water Systems

Rephile Large Direct Pure RO

High-flow water systems designed to produce reverse osmosis (RO) water from tap water directly.

Flow rates range from 50 to 300 litres per hour – ideal for users requiring 600 to 3000 liters of RO water per day.

Features:

  • The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
  • The pre-rinsing programme starts automatically once a new RO membrane is installed so there is no need for user to set additional cleaning procedures.
  • Inferior quality of RO permeate is automatically rejected until its quality meets the requirements, ensuring the water in the reservoir is always at optimal quality.
  • Product water can be dispensed from the water system directly.
  • Electrical and water compartments are completely segregated, thus safer to operate.
  • RephiLe can provide full document support to meet user’s GMP, GLP, FDA and other certification requirements.
  • The system is CE and CoHS certified, manufactured in an ISO 9001:2008 certified manufacturing site.

Main Applications:

  • Manual cleaning and glassware rinsing.
  • Buffer preparation.
  • Glassware washers.
  • Humidifiers.
  • Water baths.
  • Aging tester.
  • Autoclave.
  • Laboratory animal feed.

System Set Up

Rephile Pre-filtration kit Right arrow Rephile Large Direct-pure RO Right arrow Rephile PE reservoir

Pre-filtration kit

Large Direct-Pure RO

PE Reservoir

Specification:

Feed Water Requirements
Tap Water
Municipal water, TDS < 1000 ppm (2000 µS/cm)
Operating Temperature 5-45°C
Feed Water Pressure 30-90 psi (2-6 bar)
Water Production Flow Rate
RO water (@ 25°C) Typically 50, 100 and 300 L/hr
Product Water Quality
RO water conductivity Typically < 20 µS/cm
Monovalent ions removal >95%
Polyvalent ions removal >99%
Bacteria and particles removal >99%
Organics and pyrogens removal) >99%
Dimensions
Length x Depth x Height 400mm × 490mm × 1100mm

Ordering information

Description
Part No.
Direct-Pure Genie Water System Set – Includes:
- Main system
- RO membrane(s) (preinstalled)
Direct-Pure RO 150 Water System (150 Litres/hour) WP980001*
Direct-Pure RO 300 Water System (300 Litres/hour) WP980002*
Direct-Pure RO 150 Water System with dispenser (150 Litres/hour) WP980003*
Direct-Pure RO 300 Water System with dispenser (300 Litres/hour) WP980004*
* Full system prices start from just £7,088 – please contact us for full spec and costings.

For a full list of applicable consumables for the Large Direct-Pure® RO series, please download the pdf below:

Large Direct-Pure® EDI Water Systems


Rephile Large Direct Pure EDI

High-flow water systems designed to produce Type II water from tap water directly.

Flow rates range from 30 to 125 liters per hour. Resistivity of product water is above 5 MΩ·cm that meets or exceeds Type II water quality standards as defined by ASTM, CAP, CLSI, ISO 3696 / BS 3997, European and U.S. Pharmacopoeia. The system is CE and RoHS marked

Features:

  • The system incorporates the best in class Siemens EDI module and stringently selected RO membrane, to deliver a large amount of quality Type II water consistently at a relatively low cost.
  • System has automatic water quality control to ensure EDI water meet or exceed Type II water standards.
  • Fully automated control system has pre-rinse, RO membrane fouling preventing flush, RO membrane life detection and many other functions.
  • The pre-rinsing program starts automatically once a new RO membrane is installed so there is no need for user to set additional cleaning procedures..
  • Product water can be dispensed from the water system directly.
  • Upgradable to produce both Type II and Type I water by installing an ultrapurification cartridge inside the system.
  • RephiLe can provide full document support to meet user’s GMP, GLP, FDA and other certification requirements.

Main Applications:

  • Preparation of chemical and bio-reagents.
  • Preparation of culture media.
  • Preparation of solutions for chemical analysis such as HPLC and ICP.
  • Humidifiers.
  • For clinical analyzers.
  • Medical device and equipment rinsing.
  • For serum and blood fractionation.
  • For ophthalmics.
  • Feed water for ultrapure water systems

System Set Up

Rephile Water Softener Right arrow Rephile Pre-filtration kit Right arrow Rephile Large Direct-Pure EDI Right arrow Rephile PE reservoir

Water Softener

Pre-filtration kit

Large Direct-Pure EDI

PE reservoir

Specification:

Feed Water Requirements
Tap Water
Municipal water, TDS < 1000 ppm (2000 µS/cm)
Operating Temperature 5-45°C
Feed Water Pressure 30-90 psi (2-6 bar)
Water Production Flow Rate
Type II water (@ 25°C) Typically 30, 60 and 125 L/hr
Type I water (optional) (@ 25°C) 1.5L/min
Product Water (Type II) Quality
Resistivity (@ 25°C) 5MΩ.cm (typically 10-15 M Ω.cm)
TOC* <30 ppb
Particles (>0.2µm) <1/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Microorganisms <0.1 cfu/ml (with a 0.2µm final filter or terminal ultrafiltration cartridge)
Pyrogens (endotoxins) <0.001 Eu/ml (with a terminal ultrafiltration cartridge)
Dimensions
Length x Depth x Height 400mm × 490mm × 1100mm

Ordering information

Description
Part No.
Direct-Pure Genie Water System Set – Includes:
- Main system
- RO membrane(s) (preinstalled)
- UV lamp standard and preinstalled
*Conditioning cartridge not included.
Direct-Pure EDI 30 Water System (30 Litres/hour) WP970001*
Direct-Pure EDI 60 Water System (60 Litres/hour) WP970002*
Direct-Pure EDI 125 Water System (125 Litres/hour) WP970003*
Direct-Pure EDI 250 Water System (250 Litres/hour) WP970004*
Direct-Pure EDI 30 Water System with dispenser (30 Litres/hour) WP970005*
Direct-Pure EDI 60 Water System with dispenser (60 Litres/hour) WP970006*
Direct-Pure EDI 125 Water System with dispenser (125 Litres/hour) WP970007*
Direct-Pure EDI 250 Water System with dispenser (250 Litres/hour) WP970008*
* Full system prices start from just £9,699 – please contact us for full spec and costings.

For a full list of applicable consumables for the Large Direct-Pure® EDI series, please download the pdf below: