TQ-S Xevo Acquity System

£49K

Ref: st6157

Gallery

Waters Xevo TQ-S Acquity LC-MS/MS System

Waters Xevo TQ-S Acquity LC-MS/MS System

Waters TQ-S Xevo Acquity LC-MS/MS System
Waters Xevo TQ-S LC-MS/MS

Waters Xevo TQ-S LC-MS/MS

ESI Source

MassLynx SCN986 4.2

2 x Edwards Roughing Pumps – XDS 100 and XDS 46

Roughing pumps housed in Ion Bench

Waters Acquity Flex Cart

st6157 TQ-S Xevo Acquity System

ULTIMATE SENSITIVITY IN ALL ACQUISITION MODES

Thanks to the off axis ion source technology known as StepWave™, the system delivers unprecedented levels of sensitivity, selectivity, and accuracy, allowing you to quantify and confirm trace components at even lower levels in the most complex samples.

It is also equipped with a larger ion sampling orifice, an enhanced vacuum pumping configuration, and the revolutionary StepWave ion transfer optics.

With this sensitivity you can:

  • Detect target compounds in complex samples at the very lowest concentrations
  • Dilute samples to reduce matrix effects
  • Work with smaller sample volumes

This groundbreaking design transfers ions from the ion source to the quadrupole MS analyzer with the highest possible efficiency, at the same time ensuring undesirable neutral contaminants are actively filtered out. This dramatically increases MS ion intensities while minimizing background noise – for more confidence in the repeatability of your assay.

Read the full information here:

TQ-S Xevo Specification

Specification Details
Instrument Model Waters Xevo TQ-S Tandem Quadrupole Mass Spectrometer
Ionization Source Multi-mode source – ESI/APCI/ESCi® (standard)
Ion Transfer Optics StepWave™ off-axis ion transfer optics for enhanced ion transmission and reduced neutral contaminants.
Mass Analyzer Two high-resolution, high-stability quadrupoles (MS1 & MS2) with pre-filters to maximize resolution and transmission.
Collision Cell T-Wave™ collision cell with ScanWave™ technology for optimal high-speed MS/MS and enhanced product ion spectral quality.
Detector Low-noise, off-axis, long-life photomultiplier detector (typical Waters design).
Vacuum System Multiple air-cooled turbomolecular pumps with vacuum backing pump for robust operation.
Mass Range 2 to 2048 m/z (typical operation for quantitative workflows).
Scan Speed Up to ~10,000 Da/s with high-speed MS/MS acquisition.
Acquisition Modes
  • Full scan MS
  • Product ion scan
  • Precursor ion scan
  • Constant neutral loss scan
  • Multiple reaction monitoring (MRM)
  • Simultaneous Full scan & MRM (RADAR™) modes.
Performance Features
  • High sensitivity MRM with excellent signal-to-noise
  • Enhanced spectral confirmation with ScanWave capabilities
  • Information-rich RADAR™ acquisition.
Physical Dimensions Width ~35.6 cm (14 in), Height ~60.0 cm (23.6 in), Depth ~93 cm (36.6 in) depending on configuration.
Typical Applications Quantitative LC-MS/MS analysis for bioanalysis, food safety, environmental testing, clinical and forensic studies.

General System

  • Waters TQ-S Xevo LC-MS/MS
  • Acquity UPLC - please specify your requirements
  • 2 x Edwards Roughing Pumps (XDS 100 / XDS 46)
  • ion Bench (MS)
  • Flex Cart (UPLC)
  • Windows 11 PC running MassLynx SCN986 4.2 Software
  • Syring pump (as pictured)
  • TFT Screen
  • New Samsung printer
  • UK Installation
  • 12 month UK warranty

This system has been fully serviced, tuned and calibrated in-house at Jaytee HQ.

Offered with a full Jaytee Biosciences 1 year on-site warranty, this system is in excellent working condition and is ready for full demonstration - enquire below.

Included

  • System - specification as outlined in the main description
  • Sample testing - supply your compound(s) and our method development expert will provide the results for instrument assessment
  • Demonstration of capability at our lab in Kent, UK
  • Operational Data, Performance Data
  • Full service report
  • System Installation by our in-house MS Engineer (enquire if outside the UK)

Optional Extras

  • Water re-circulator
  • Syringe pump - New or reconditioned
  • Nitrogen Generator - New or reconditioned
  • Air Purifier - from CLAIND
  • Air Compressor - from CLAIND
  • Maintenance Agreements / Calibration - As the UK's biggest independent service provider of LC/GC instrumentation, we offer 4 levels of cover. Details here...
  • On-site Training - Both system overview and software familiarisation
  • Extended Warranty - we know the quality of our workmanship and hold stock of spare parts, so please enquire if you require a longer warranty period.
  • Method Development - Our in-house method development specialist has had over 40 years experience in developing methods for one of the world's largest multi-nationals. Please enquire if you require assistance in developing your methods

Warranty

Jaytee Biosciences Ltd provide a 12 month on-site warranty (UK), effective from the date of installation.

Note: Our warranty terms quoted for this system apply to mainland UK customers. For clients outside of this locale, please enquire at point of sale.

All warranty repairs will be attended on-site however Jaytee Biosciences reserve the right to return the instrument to base for further troubleshooting if required.

TYPICAL PARTS NOT INCLUDED IN WARRANTY:

  • Capillaries
  • Tubing
  • Vacuum Pump Oil
  • Exhaust Filters
  • Air Filters
  • PCs and Monitors
  • LC/GC Column Fittings
  • Electron Multipliers

Any other parts where cause of failure can be traced to customer error, neglect or accidental damage.

If you have any further queries or questions regarding warranty, please do not hesitate to contact us below.

ENQUIRE HERE