Troubleshooting Process Chart
– Probable Instrument Fault
– Correct / Change Set-up & Re-run Analysis
– Probable Methodology Fault
– Leak in System – Pump Fault
– Detector Fault or Injector Fault
– Pump Fault or Column Compartment Fault
– Autosampler Fault
– Improve Method
– High Back Pressure Issues
– Run a Known Method on the System
– Look for Differences Between Systems
– Probable Instrument Fault
– Correct / Change Set-up & Re-run Analysis
– Probable Methodology Fault
– Leak in System – Pump Fault
– Detector Fault or Injector Fault
– Pump Fault or Column Compartment Fault
– Autosampler Fault
– Improve Method
– High Back Pressure Issues
– Run a Known Method on the System
– Look for Differences Between Systems
Leak in System / Pump Fault
Having established that the system is not generating enough backpressure, there are a few areas to review:- The system is leaking – check column connections and other fittings
- The pump is not delivering the correct flow
- The pressure sensor is not working
