Trajan SGE 1035008 Gas Filter Connecting Unit 1/8″ (2 position, High Flow) | Like CP17985
£410.00
Two position cartridge base plate for SGE upright gas filters. 1/8″ connection, stainless steel body, high flow rate (30 litres / min).
Like Agilent CP17985 and SGT B0021-S4.
Gas Filter Selection Guide
| Technique | Recommended Filters | Advantages |
|---|---|---|
| GC-MS | Carrier gas | High data accuracy, lower maintenance |
| GC column | Moisture and oxygen | Longer lifetime |
| Electron capture detectors (ECD) | Moisture and oxygen | High sensitivity |
| Thermal conductivity detectors (TCD) | Moisture and oxygen | High sensitivity, lower maintenance |
| Flame ionization detectors (FID) | Two hydrocarbon | High sensitivity |
| Photoionization detectors (PID) | Oxygen and hydrocarbon | High sensitivity |
Gas Filter Technical Specifications
| Oxygen Filter | Moisture Filter | Hydrocarbon Filter | Carrier Gas Filter | |
|---|---|---|---|---|
| Function | Removes oxygen as well as traces of sulfur and chlorine compounds from the carrier gas | Removes water, oil and other foreign material from the carrier gas | Removes organic compounds from gas streams | Single combination filter; removes water, oxygen and organic compounds |
| Indicator Color Change | From green to gray | From green to pale brown | No indicator | Oxygen: from green to gray Moisture: from green to pale brown Hydrocarbons: no indicator |
| Capacity | 150 mL oxygen | 7.2 g water | Approximately 7 g, depending on impurities | 100 mL oxygen, 1 g water, organics depending on impurities |
| Outlet Concentration at Operating Flow of 1-10 L/min | <50 ppb | <0.1 ppm | <0.1 ppm | Oxygen <50 ppb Moisture <0.1 ppm Organics <0.1 ppm |
The Trajan SGE gas filter system delivers high purity gases to your GC, ICP and MS systems,
minimising column damage, maximising sensitivity, and reducing downtime, and are designed to provide fast stabilisation times to reduce gas consumption, and ultimately to provide clean gas.
Set up
The system consists of a range of connecting units (single, dual and quadruple port) and the filter.
The connecting unit is equipped with inlet and outlet connectors for the gas lines, and two needle-like valves that automatically initiates the flow of gas once attached. The connecting unit can be bench or wall-mounted and is available for 1/4″ and 1/8″ gas lines.
The filters consist of adsorbent that is packed into a transparent and virtually unbreakable, heavy-walled polycarbonate housing. When installed onto the connecting unit, the needle-like valves puncture the PTFE seals and allow gas to flow through the filter.
Shop All Gas Filtration Cartridge Products
| DESCRIPTION | APPLICATION | REMOVES | IMAGE | Part No |
|---|---|---|---|---|
| Carrier Gas Triple Filter Cartridge | GC-MS |
|  | 1035250 |
| Carrier Gas Filter Kit, 1/4″ | GC-MS |
|  | 1035154 |
| Carrier Gas Filter Kit, 1/8″ | GC-MS |
|  | 1035158 |
| Hydrocarbon Gas Filter Cartridge | FID for air and hydrogen. PID when used with an oxygen filter |
|  | 1035230 |
| Moisture Gas Filter Cartridge | ECD & TCD when used with an oxygen filter GC columns when used with an oxygen filter |
|  | 1035220 |
| Oxygen Gas Filter Cartridge | ECD & TCD when used with an moisture filter PID when used with a hydrocarbon filter |
|  | 1035210 |
| FID Gas Filter Kit, 1/4″ | FID |
|  | 1035164 |
| FID Gas Filter Kit, 1/8″ | FID |
|  | 1035168 |
| 1 Position Connecting Unit 1/4″ | Carrier Gas |  | 1035014 | |
| 1 Position Connecting Unit 1/8″ | Carrier Gas |  | 1035018 | |
| 2 Position Connecting Unit 1/4″ | GC column ECD, TCD, PID |  | 1035024 | |
| High Flow 2 Position Connecting Unit 1/4″ | GC column ECD, TCD, PID |  | 1035004 | |
| 2 Position Connecting Unit 1/8″ | GC column ECD, TCD, PID |  | 1035028 | |
| High Flow 2 Position Connecting Unit 1/8″ | GC column ECD, TCD, PID |  | 1035008 | |
| 4 Position Connecting Unit 1/4″ | FID |  | 1035044 | |
| 4 Position Connecting Unit 1/8″ | FID |  | 1035048 |
| Weight | 0.2 kg |
|---|---|
| Dimensions | 35 × 5 × 6 cm |
| Brand Name | |
| Filter Type | Upright |
| Fitting Type | 1/8″ Stainless Steel Compression |
| Max Pressure | 219 psi |
| Flow Rate (ml/min) | |
| Alternative Part Numbers | |
| Pack Size |
You may also like…
SGE-1035014
SGE-1035004
Cartridge System
Trajan SGE 1035004 Gas Filter Connecting Unit 1/4″ (2 position, High Flow) | Like CP17984
Related products
SGE-000350
Micro Liter / Volume
Trajan SGE 000350 0.5µL NanoVolume Syringe with Repeating Adapter, Cone, Gauge: 23, 50mm
SGE-092005
SGE-000303
Micro Liter / Volume
Trajan SGE 000303 0.5µL NanoVolume Syringe, Bevel, 26 G, 50mm, 0.47mm OD
SGE-0726006
SGE-0726007
GC Inlet Liners
Trajan SGE 0726007 Graphite Sealing Ring for Shimadzu GC-17A GC Liners 5mm OD. 10 Pack
SGE-000353
Micro Liter / Volume
Trajan SGE 000353 0.5µL NanoVolume Syringe with Repeating Adapter, Cone, Gauge: 26 (0.47), 50mm
SGE-000310
Micro Liter / Volume
Trajan SGE 000310 0.5µL NanoVolume Syringe. Cone, Gauge: 23 (0.63), 70mm Long
