Standard PEEK HPLC Tubing
kromega offer a range of 1/16th Inch Outer Diameter (OD) chromatography grade PEEK HPLC tubing*.
The tubing has been manufactured to withstand the demands of high performance liquid chromatography, and is colour coded to enable easy identification of the internal diameter. The high quality, ultra-value tubing has been developed in response to customers demands for customer-specified lengths.
- Priced by the metre**
- 1/16″ OD
- Colour coded for easy identification of internal diameter
- Designed for flexibility – customer specific lengths
- Tested by Jaytee, now used by our own engineers for our critical customer base
Part Number | Material | Application | Tolerance (inches) | psi | I.D. (inches) | O.D. (inches) | Colour | Price per Metre* |
---|---|---|---|---|---|---|---|---|
A230010 | PEEK | Generally used for connecting the column to the detector. | ±0.002 | 6100 | 0.005 | 1/16 | Red | £10.00Add to cart |
A230017 | Red Stripe / Natural | £10.00Add to cart |
||||||
A230011 | PEEK | Used to connect the column to the detector depending on application and preference. | ±0.002 | 5800 | 0.007 | 1/16 | Yellow | £10.00Add to cart |
A230018 | Yellow Stripe / Natural | £10.00Add to cart |
||||||
A230012 | PEEK | For connecting the autosampler to the column. | ±0.002 | 5600 | 0.010 | 1/16 | Blue | £10.00Add to cart |
A230019 | Blue Stripe / Natural | £10.00Add to cart |
||||||
A230013 | PEEK | For connecting the pump to the autosampler. | ±0.002 | 4500 | 0.020 | 1/16 | Orange | £10.00Add to cart |
A230020 | Orange Stripe / Natural | £10.00Add to cart |
||||||
A230014 | PEEK | For use on the pump outlet. | ±0.002 | 3500 | 0.030 | 1/16 | Green | £10.00Add to cart |
A230021 | Green Stripe / Natural | £10.00Add to cart |
||||||
A230015 | PEEK | For use on pump inlet or waste from detector. Also used for low-pressure applications. | ±0.002 | 2400 | 0.040 | 1/16 | Grey | £10.00Add to cart |
A230022 | Grey Stripe / Natural | £10.00Add to cart |
||||||
A230023 | PEEK | ±0.002 | 0.055 | 1/16 | Black Stripe / Natural | £10.00Add to cart |
||
A230024 | PEEK | For use on solvent inlet | ±0.002 | 2.0mm | 1/8 | Natural | £11.00Add to cart |
* Each length of tubing is priced by the metre – eg. When ordering 5 off part id A230013, you will receive a 5 metre length.
** Longest continuous available length of any peek tubing is 10 metres.
PEEK Flexi Tube
kromega offer 4 IDs of PEEK flexi tubing.
Available in red, striped red, yellow, striped yellow, blue, striped blue, orange and striped orange, the range provides a neat and tidy alternative to standard HPLC tubing.
- Priced indivually
- Finger-tight fittings supplied to each end
- 1/16″ OD
- Colour coded for easy identification of internal diameter
- Designed for flexibility and neatness
- Tested by Jaytee in the field
Part Number | Material | Application | psi | I.D. (inches) | O.D. (inches) | Length (mm) | Colour | Price |
---|---|---|---|---|---|---|---|---|
A230025 | PEEK FlexiTube | Generally used for connecting the column to the detector. | 6100 | 0.005 | 1/16 | 945 | Red | £24.00Add to cart |
A230026 | PEEK FlexiTube | Generally used for connecting the column to the detector. | 6100 | 0.005 | 1/16 | 945 | Striped Red | £24.00Add to cart |
A230027 | PEEK FlexiTube | Used to connect the column to the detector depending on application and preference. | 5800 | 0.007 | 1/16 | 1585 | Yellow | £27.00Add to cart |
A230028 | PEEK FlexiTube | Used to connect the column to the detector depending on application and preference. | 5800 | 0.007 | 1/16 | 2060 | Striped Yellow | £28.00Add to cart |
A230029 | PEEK FlexiTube | For connecting the autosampler to the column. | 5600 | 0.010 | 1/16 | 1225 | Blue | £25.00Add to cart |
A230030 | PEEK FlexiTube | For connecting the autosampler to the column. | 5600 | 0.010 | 1/16 | 1585 | Striped Blue | £27.00Add to cart |
A230031 | PEEK FlexiTube | For connecting the pump to the autosampler. | 4500 | 0.020 | 1/16 | 2060 | Orange | £24.00Add to cart |
A230032 | PEEK FlexiTube | For connecting the pump to the autosampler. | 4500 | 0.020 | 1/16 | 2060 | Striped Orange | £28.00Add to cart |
PEEK Fittings & Tubing Kits
This kromega PEEK Fittings & Tubing Kit brings together a selection of commonly used parts needed for interconnection of HPLC system instruments.Ideal for running repairs or unexpected system changes – everything you need conveniently packed in a sturdy plastic case.In the kit:
10 x PEEK Fingertight Fitting
2 x PEEK Union
5 metres of 1/16″ x 0.010″ PEEK Tubing (Blue)
5 metres of 1/16″ x 0.020″ PEEK Tubing (Orange)
1 x PEEK Tubing CutterAll parts can be purchased individually, however, this kit offers considerable cost savings.
Standard PTFE HPLC Tubing
For chromatography customers requiring complete chemical resistance we recommend the use of PTFE HPLC tubing* – chemically inert, non-toxic and bio-compatible.
The tubing is available in a range of sizes and also for specific applications and uses (see table below).
- Available per metre to customers requirements
- Both 1/16″ and 1/8″ OD available
- Evaluated and used by Jaytee’s Service Department
Part Number | Material | I.D. (inches) | I.D. (mm) | O.D. (inches) | Price per Metre |
---|---|---|---|---|---|
A210010 | PTFE | 0.010 | 0.254 | 1/16 | £2.50Add to cart |
A210011 | PTFE | 0.020 | 0.508 | 1/16 | £3.00Add to cart |
A210012 | PTFE | 1/16 | 1.587 | 1/8 | £3.00Add to cart |
A210014 | PTFE | Push Fit onto 1/16" OD Tube | £1.50Add to cart |
||
A210015 | PTFE | Waters Solvent Inlet (Connects Waters inlet line to Waters filter) | 0.125 | 0.140mm | £2.50Add to cart |
*Each length of tubing is priced by the metre – eg. When ordering 5 off part id A200013, you will receive a 5 metre length
Stainless Steel HPLC Tubing
Jaytee offer the great value Kromega range of 1/16th Inch O.D. stainless steel tubing* for use with chromatography systems.Made from 316-type stainless steel as fitted by Original Equipment Manufacturers (OEMs).
Available in popular internal diameters: 0.010″, 0.020″, 0.030″ and 0.040″.
- High quality chromatographic grade seamless drawn tubing
- The use of 316 type offers superior chloride ion resistance
- Rated for use between -53 and +280 degrees centigrade
- High tolerance inside and outside diameters ensures trouble free use
Part Number | Material | Tolerance | I.D. (inches) | I.D. (mm) | O.D. (inches) | Price per Metre |
---|---|---|---|---|---|---|
A200010 | Stainless Steel | ±0.0010" | 0.010 | 0.254 | 1/16 | £9.00Add to cart |
A200011 | Stainless Steel | ±0.0010" | 0.020 | 0.508 | 1/16 | £8.00Add to cart |
A200012 | Stainless Steel | ±0.0010" | 0.030 | 0.762 | 1/16 | £8.00Add to cart |
A200013 | Stainless Steel | ±0.0010" | 0.040 | 1.016 | 1/16 | £8.00Add to cart |
*Each length of tubing is priced by the metre – eg. When ordering 5 off part id A200013, you will receive a 5 metre length.
HPLC Tubing Cutters
PEEK / PTFE Tubing Cutter
To ensure leek-free connections, the tubing range also includes a dedicated tubing cutter.
The cutter makes burr free, perpendicular, non-distorted cuts to the new range of PTFE & PEEK tubing:
Stainless Steel Tubing Cutter
To enable users to cut shorter lengths of stainless steel tubing we recommend the use of the new kromega stainless steel tubing cutter:
Tubing Cutter for Polymer Tubing
For tubing between 1.5 mm and 13 mm O.D.
HPLC Inlet Solvent Filters
- Hastelloy C high inertness frit
- Tapered construction stops cross contamination, internal taper avoids bubble trapping
- Quick pushfit tube design accepts metric and imperial tubing
- Slotted last drop base construction to minimise solvent waste, whilst maintaining efficient performance
Part Number | Description | Usage | ||
---|---|---|---|---|
A490010 | ![]() | Sparge Filter 2µ (for helium degassing) 1 Pack | General HPLC | £14.50Add to cart |
A490011 | Inlet Solvent Filter 10µ 1 Pack | General HPLC | £19.50Add to cart |
|
A401011 | ![]() | Glass Inlet Solvent Filter, Agilent style | Agilent HPLC | £28.00Add to cart |
A401010 | ![]() | Adapter for Agilent style Inlet Solvent Filter A401011 | Agilent HPLC | £5.20Add to cart |