New Era Syringe Pumps
- Overview
- Infusion Only
- One Channel
- One Channel Continuous
- "Push-Pull"
- Two Channel
- Multi-Channel
- High Pressure
- OEM
- Microfluidic
- Peristaltic
- Accessories
- FAQs
The New Era family of programmable syringe pump products provide an affordable solution to your sophisticated dispensing and flow control applications.
Jaytee promote the full range of programmable syringe pump(linked above), with particular focus on 2 products that compliment our chromatography ranges – the NE-1000 Single syringe pump and the NE-300 infusion only pump (LC-MS applications).
- Increases flow at a smooth rate
- Any two syringe pumps in the NE-1000 family of syringe pumps can talk to each other in the family, allowing the pumps to perform either continuous flow, emulsification or you can disconnect the cable and work independently at any time
- Unparalleled customer support- free telephone support available
- Includes all the advanced features of a high end pump (infusion & withdrawal, programmability and computer compatibility) at an affordable price
* Not for use on humans
** If you wish to use our pumps for electrospinning a special pump power supply is available – please enquire before purchasing
NE-300 Infusion Pump
The NE-300 is a general purpose single syringe pump capable of infusing at digitally set pumping rates. It is controlled from a microcontroller based system which drives a step motor, allowing a wide range of pumping rates configured to the inside diameter of the loaded syringe. The syringe is driven from a drivescrew and drive-nut mechanism.
Perfect for LC-MS applications, the NE-300 from New Era features just the functions you require, without those that you do not at an amazing price.
Features
- Holds small or big syringes up to 60 mL
- Pumps continuously until you stop the pump
- Infusion rate can be changed while pumping
- Remembers previous settings on power up
- Power failure mode allow pump to continue pumping after a reset
- Syringe purge mode
- Displays total volume dispensed in mL or µL units
- Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
- Precise reproducible flow rates
- Selectable infusion rtes units: mL/hr, µL/hr, mL/min, µL/min
- Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately
- Infuses Only
- Does not withdraw, volume target, or have computer interface
- Just the features that you want to pay for
Mechanical & Electrical Specifications |
|
| Syringe sizes | Up to 140 cc |
| Number of syringes: | 1 |
| Motor type: | Step motor |
| Motor steps per revolution: | 400 |
| Microstepping: | 1/8 to 1/2 depending on motor speed |
| Advance per step: | 0.2126 μM to 0.8504 μM depending on motor speed |
| Motor to drive screw ratio: | 15/28 |
| Drive screw pitch: | 20 revolutions/” |
| DC connector: | 2.1 mm, center positive |
| Voltage at DC connector: | 12V DC at full load |
| Amperage: | 750 mA at full load |
| Power supply output rating: | 12V DC @ 800 mA |
| Dimensions: | 22.86 cm x 14.605 cm x 11.43 cm high |
| Weight: | 1.63 kg |
Operational Specifications |
|
| Maximum speed: | 3.7742 cm/min |
| Minimum speed: | 0.004205 cm/hr |
| Maximum pumping rate: | 1,257 mL/hr with a B-D 60 mL syringe |
| Minimum pumping rate: | 0.73 μL/hr with a B-D 1 mL syringe |
| Maximum force: | 35 lbs. at minimum speed, 18 lbs. at maximum speed |
| Number of Program Phases: | 0.100 to 50.00 mm |
1000 / 8000 Series One Channel Syringe Pumps
The 1000 & 8000 series provide a general purpose single syringe pump capable of infusion and withdrawal. It is controlled from a micro controller based system which drives a step motor, allowing a large range of pumping rates configured to the inside diameter of the loaded syringe. The syringe is driven from a drive-screw and drive-nut mechanism.
They accept a single syringe, from the smallest size available up to 60 mL (a 140 mL syringe can be filled up to 120 mL).
Both the NE-1000 & Dual-NE-1000 have a pumping rate as low as 0.73 μL/hr (with a 1 mL syringe) and 35.33 mL/min (with a 60 mL syringe).
For high pressures, our NE-1010 unit comes with a pumping rate as low as 1.459 μL/hr (with a 1 mL syringe) and 127.2 mL/min (with a 60 mL syringe).
For micro fluidics, the NE-1002X pumping rate is low as .008 nL/hr (with a 0.5 μL syringe) and as high as 1555 μL/min (with a 60 mL syringe).
Options
| Model | Force (lbs) / Speed (fast-slow) | Maximum Flow Rate with 60 mL Syringe | Specification Sheet | |
|---|---|---|---|---|
| NE-1000 | 15-45 | 35.33 mL/min | VIEW SPEC | VIEW PRODUCT |
| NE-1010 | 15-90 | 127.2 mL/min | VIEW SPEC | VIEW PRODUCT |
| NE-1050 | 25-35 | 554.1 mL/min | VIEW SPEC | VIEW PRODUCT |
| NE-1060 | 10-25 | 1198.0 mL/min | VIEW SPEC | VIEW PRODUCT |
| NE-8000 | 200-200 | 208.0 mL/min | VIEW SPEC | VIEW PRODUCT |
| NE-8060 | 200-200 | 817.1 mL/min | VIEW SPEC | VIEW PRODUCT |
Features
- Built for Automation
- Operates stand-alone or from a computer
- Infuses and withdraws
- Applications range from simple infusions to complex pumping programs
- Programmable preset protocols
- Program up to 41 pumping phases: change pumping rates, set dispensing volumes,
insert pauses, control and respond to external signals, sound the buzzer - RS-232 and TTL logic control interfaces
- 2 year warranty
- Worldwide power supplies available
- Unlimited lifetime technical support
There is an option to join two pumps with a dual cable create a dual pump system, allowing for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer. Also features Motor stall detection, dispensing accuracy of +/-1%.
Mechanical & Electrical Specifications |
|
| Syringe sizes | Up to 60 mL (140 mL partially filled) |
| Number of syringes: | 1 |
| Motor type: | Step motor |
| Motor steps per revolution: | 400 |
| Microstepping: | 1/8 to 1/2 depending on motor speed |
| Advance per step: | 0.2126 μM to 0.8504 μM depending on motor speed |
| Motor to drive screw ratio: | 15/28 |
| Drive screw pitch: | 20 revolutions/” |
| DC connector: | 2.1 mm, center positive |
| Voltage at DC connector: | 12V DC at full load |
| Amperage: | 750 mA at full load |
| Power supply output rating: | 12V DC @ 800 mA |
| Dimensions: | 22.86 cm x 14.605 cm x 11.43 cm (H) |
| Weight: | 1.63 kg |
| Allen Wrench | 3/32 Hex |
Operational Specifications |
|
| Maximum speed: | 5.1005 cm/min |
| Minimum speed: | 0.004205 cm/hr |
| Maximum pumping rate: | 1699 mL/hr with a B - D 60 cc syringe |
| Minimum pumping rate: | 0.73 μL/hr with a B - D 1 cc syringe |
| Maximum force: | 35 lbs. at minimum speed, 18 lbs. at maximum speed |
| Number of Program Phases: | 41 |
| RS-232 pump network: | 100 pumps maximum |
| RS-232 selectable baud rates: | 300, 1200, 2400, 9600, 19200 |
| Syringe inside diameter range: | 0.100 to 50.00 mm |
NE-SYR-002
NE-SYR-017
NE-SYR-018
Continuous Infusion / Dual Syringe Pump System
The DUAL-NE-1000X Continuous Pump System eliminates the problem of flow rate drop-offs and pauses found in “Push-Pull” syringe pump systems.
With “Push-Pull” systems, one syringe infuses, while the other refills, then they switch directions. This switch of directions causes a delay in flow while the syringes are primed.
This solution is smart, simple and saves you money and solves the inconsistent flow rate problems of “push-pull” pumps. By utilising three pumps in one at a price that is less than alternative limited function push/pull or emulsification style pumps.
How?
The refilling syringe pump fills the syringe at a faster rate than the infusing syringe pump infuses, giving it time to prime the syringe after the syringe is filled, or even overlap the infusion to create a seamless transition between syringes.
The smoothness of the transition between syringes can be fine tuned by adjusting the infusion rate, refill rate, priming rate, prime volume and overlap volume parameters.
The system allows two pumps to talk to one another through a synchronization cable. This allows the flexibility for the pumps to be configured to operate in continuous flow (push/pull), emulsification or independently at any time.
Features exclusive to the Dual Pump System:
- Utilizes specialized dual pump synchronization cable to synchronize both pumps
- Includes: 2 x NE-1000 programmable single syringe pumps, synchronization cable, and two power supplies
- Disconnect the cable and you have two independent syringe pumps
Description
- Two single syringe pumps, each pump holds 1 syringe up to 60 mL, or 140 mL partially filled
- Continuous infusion mode allows one pump to infuse while the other withdraws
- Dual pump mode allows for duplicate operation of the two pumps
- Infusion rates from 0.73 µL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe)
- Easy-to-use keypad interface
- Includes all the advanced functions and programming features of the NE-1000 Series
- Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately
- Dual Pump Plumbing Kit, the syringes and plumbing seen in the above picture, completes the continuous system. (Sold separately)
"Push-Pull" Continuous Infusion / Dual Syringe Pump System
The "Push-Pull" Continuous Infusion/Dual Syringe Pump System is smart, simple and saves you money. With this system you have three pumps in one, at a price that is less than alternative, limited function push/pull or emulsification style pumps. The Dual System allows two pumps to communicate with each other through a synchronization cable. This creates a flexible system that can be re-configured to operate in continuous flow (push/pull), emulsification, alternating dispensing, or independently at any time.
Features exclusive to the Push-Pull System:
- Holds 2 syringes up to 60 mL
- Reciprocating Mode allows one pump to infuse while the other withdraws
- Dual Pump Mode allows for duplicate operation of the two pumps.
- Infusion rates from 0.73 µL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe)
- Available in Higher Pressure (Dual NE-1010) and 2 channel Syringe (Dual NE-4000) versions (any two syringe pumps in the NE-1000 Series of Syringe Pumps (except NE-300) can be configured as a Dual Pump System).
- Easy-to-use keypad interface
- Includes all the advanced functions and programming features of the NE-1000 Series.
- Dual Pump Plumbing Kit, the syringes and plumbing seen in the above picture, completes the continuous system (available separately – please enquire).
Exclusive Features
- Utilizes specialized dual pump synchronization cable to synchronize both pumps.
- Includes: 2 NE-1000 programmable single syringe pumps, synchronization cable, and two power supplies.
- Disconnect the cable and you have two independent syringe pumps.
Example Flow Rates for the DUAL-1000:
| Syringe Size | Maximum Rate | Minimum Rate |
| 0.5 µL | 25.49 µL/hr | 0.001 µL/hr |
| 1 mL | 52.86 mL/hr | 0.727 µL/hr |
| 3 mL | 223.8 mL/hr | 3.076 µL/hr |
| 5 mL | 372.5 mL/hr | 5.119 µL/hr |
| 10 mL | 607.6 mL/hr | 8.349 µL/hr |
| 20 mL | 966.2 mL/hr | 13.28 µL/hr |
| 30 mL | 1260 mL/hr | 17.32 µL/hr |
| 60 mL | 2120 mL/hr | 29.1 µL/hr |
| 140 mL | 3470 mL/hr | 47.7 µL/hr |
DUAL-1010 High Pressure Syringe Pump
Features
- All the features of the DUAL-1000 plus more
- Includes: 2 x NE-1010 programmable single syringe pumps, synchronization cable and two power supplies.
Example Flow Rates NE-1010:
| Syringe Size | Maximum Rate | Minimum Rate |
| 0.5 µL | 91.83 µL/hr | 0.001 µL/hr |
| 1 mL | 190.4 mL/hr | 1.453 µL/hr |
| 3 mL | 806.1 mL/hr | 6.151 µL/hr |
| 5 mL | 1341 mL/hr | 10.24 µL/hr |
| 10 mL | 2188 mL/hr | 16.7 µL/hr |
| 20 mL | 3479 mL/hr | 26.55 µL/hr |
| 30 mL | 4539 mL/hr | 34.64 µL/hr |
| 60 mL | 7635 mL/hr | 58.3 µL/hr |
| 140 mL | 208.3 mL/min | 95.37 µL/hr |
DUAL-4000 Two Channel Syringe Pump
Features
- Same description and all the features of the DUAL-NE-1000 plus more
- Includes: 2 NE-4000 two channel programmable syringe pumps, synchronization cable, and two power supplies
- Holds 4 syringes up to 60 mL
* If you need to create two continuous infusion streams, you require 2 x Dual Pump Plumbing Kits for full use of all four channels in the system – please enquire.
NE-4000 Double Syringe Pump
Accepts 2 different syringes from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120mL. 2 different sized syringes can be used for proportional infusion. NE-4000 & Dual-NE-4000 pumping rate as low as 1.459 μL/hr with a 1 mL syringe or as high as 127.2 mL/min with a 60 mL syringe. NE-4002X pumping rate as low as .008 nL/hr with a 0.5 μL syringe or as high as 1555 μL/min with a 60 mL syringe.
Features
- Built for Automation
- Operates stand-alone or from a computer
- Infuses and withdraws
- Applications range from simple infusions to complex pumping programs
- Programmable preset protocols
- Program up to 41 pumping phases: change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- RS-232 and TTL logic control interfaces
Two pumps connected with a dual cable create a Dual Pump System allowing for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer. Any EU power supply available, with motor stall detection. Non-volatile memory of all parameters and programming. Upgradeable to the X and X2 advanced firmware versions for gradient pumping and increased program memory. Dispensing accuracy of +/-1%. Unlimited lifetime technical support. Two year warranty.
MultiChannel Syringe Pumps
- Fully programmable automation capable
- Operates stand-alone or from a computer. Cables sold separately.
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- One-click program upload from “Pumping Program Generator” spreadsheet
- Network, control, and monitor up to 100 pumps with one computer.
- Motor stall detection
- Dispensing accuracy of +/-1%
- Unlimited lifetime technical support
- Two year warranty
NE-1200 / DUAL-NE-1200
- Holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 cc each
- Infusion rates from 0.454 μL/hr (1 cc syringe) to 121.2 mL/hr (3 cc syringe)
- Higher flow rate models available
- Easy-to-use keypad interface
NE-1600 / DUAL-NE-1600
- Holds 2, 4 or 6 syringes of up to 60 cc each or 2 or 4 syringes up to 140 cc each
- Infusion rates from 0.454 μL/hr (1 cc sy-ringe) to 2376 mL/hr (140 cc syringe)
- Higher flow rate models available
- Easy-to-use keypad interface
NE-1800 / DUAL-NE-1800
- Holds 2, 4, 6 or 8 syringes of up to 10 cc each
- Infusion rates from 0.454 μL/hr (1 cc syringe) to 342.6 mL/hr (10 cc syringe)
- Higher flow rate models available
- Easy-to-use keypad interface
High Pressure Syringe Pumps
NE-8000 (200 lbs Maximum Force)
The NE-8000 produces about 200 lbs of linear force at slow speeds and 18 lbs at top speed. 10 mL/hr is an example of slow speed. Pressure output is relative to the syringe size. On a 60 mL syringe, this would produce approximately 120 psi.
Main features
- Built-in adjustable and programmable limit switches for infusion and withdrawal
- Adjustable force limit reduces maximum force
- Fully programmable; Designed for automation
- Operates stand-alone or from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- Network, control, and monitor up to 100 pumps with one computer
- Worldwide power supplies available
- Dispensing accuracy of ± 1%
- Unlimited lifetime technical support
- Two year warranty
- Holds 1 Syringe up to 140 mL. (200 mL partially filled)
- Infusion rates from 1.733 µL/hr (1 mL syringe) to 340.6 mL/min (140 mL syringe)
- Easy-to-use keypad interface
- Space Saving Chassis: Foot print size of only 11 1/4″ x 6 1/8″
- Won’t take up unnecessary space on your laboratory or production bench
- Includes all the advanced functions and programming features of the NE-1000 series
- Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately
NE-1010 High Pressure Syringe Pump
Features
- All the features of the NE-1000
- Can (approximately) double the pressure of the NE-1000
- Fully programmable; automation capable
- Operates stand-alone or from a computer. Cables sold separately
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
Example Flow Rates NE-1010:
| Syringe Size | Maximum Rate | Minimum Rate |
| 0.5 µL | 91.83 µL/hr | 0.001 µL/hr |
| 1 mL | 190.4 mL/hr | 1.453 µL/hr |
| 3 mL | 806.1 mL/hr | 6.151 µL/hr |
| 5 mL | 1341 mL/hr | 10.24 µL/hr |
| 10 mL | 2188 mL/hr | 16.7 µL/hr |
| 20 mL | 3479 mL/hr | 26.55 µL/hr |
| 30 mL | 4539 mL/hr | 34.64 µL/hr |
| 60 mL | 7635 mL/hr | 58.3 µL/hr |
| 140 mL | 208.3 mL/min | 95.37 µL/hr |
OEM Syringe Pump / Double OEM Syringe Pump
- Computer controllable: networkable up to 100 pumps
- Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
- Add the OEM Starter Kit to run as a fully functional, stand-alone pump
- Designed for OEM applications, this pump has the same mechanisms and electronics as the NE-1000 aside from the front panel controls
- Operates from a computer or a foot switch
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- Network, control, and monitor up to 100 pumps with one computer
- Motor stall detection available in NE-501 model
- Dispensing accuracy of ± 1%
NE-1002X Microfluidics Syringe Pumps
Advance Per Step: 4.252232 Nanometers
Smooth pumping at ultra low flow rates. Accepts syringes from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120mL. Pumping rate as low as 0.008 nL/hr with a .5 μL syringe or as high as 1246 μL/min with a 60 mL syringe. Includes the X Upgrade Smooth Linear/Gradient increasing and decreasing pumping feature.
- Built for Automation
- Operates stand-alone or from a computer
- Infuses and withdraws
- Applications range from simple infusions to complex pumping programs
- Programmable preset protocols Program up to 41 pumping phases: change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer.
- RS-232 and TTL logic control interfaces
NE-9000 Peristaltic Dispensing Pump
Do you have a need to accurately fill multiple bottles, vials, or other containers with a liquid? The Learn and Repeat™ mode of the NE-9000 Peristaltic Pump from New Era Pumps makes even the smallest of businesses highly productive.
The NE-9000 is equipped to be used in many settings from the small home based businesses to the large factory floor. The pump can be integrated into existing production lines or simply used stand alone. The NE-9000 comes fully programmable and can be operated manually or with a PC through a RS-232 communication port. Even the most novice of technology users can easily operate the pump stand alone or through the PC. The pump’s specialty is in small scale production dispensing. It will fill numerous bottles, vials, etc. with fluids of all types.
Equipped for mass production dispensing at a price affordable for the home based business, this pump is a great deal no matter what your purchas-ing power is. The flow rates vary from a minimum of 0.041 mL/min to a maximum of 904.4 mL/min with 3/16″ ID. tubing. Space Saving Chassis: Foot print size of only 7 3/4″ x 5 1/4″. Won’t take up unnecessary space on your laboratory or production bench. Easy-to-use keypad interface.
Features
- Pump from a reservoir through replaceable continuous tubing
- Pump never comes into contact with fluid
- Continuous Pumping. Up to 900 mL/min
- Measured dispenses for production filling of bottles
- Learn and Repeat™ for quick setup of production dispenses
- Computer and foot switch interface.
